How to Remove Silicone Sealant
Whether you're refreshing sink areas, countertops, baths or skirting boards, it’s important to know how to remove old silicone sealant properly, as leaving residue behind can stop new sealant from bonding. Krud Kutter Caulk & Sealant Remover helps soften old sealant so it can be scraped away more easily.
In this blog, we focus specifically on how to remove bath sealant using Krud Kutter.
You will need:
· Krud Kutter Caulk & Sealant Remover
· A sealant remover tool
· Safety glasses
· Protective gloves
· A clean cloth
Step 1
Start by removing any loose sealant. Scrape, cut or pull away anything that can be easily removed and score the edge of the remaining sealant. Always wear rubber gloves and eye protection.
Step 2
Thoroughly saturate the sealant with Krud Kutter Caulk & Sealant Remover, making sure the area is fully covered. Make sure to test Krud Kutter on an inconspicuous area before use.
Step 3
Allow to soak for 5–20 minutes, or until the sealant loosens. You can grab a cuppa while you wait! Some applications may need a longer soaking time depending on the type, age and amount of sealant being removed.
Step 4
Scrape away the loosened sealant with a sealant remover tool, scraper, stiff-bristled brush or flexible blade. Repeat as needed to remove residue.
And that's it!
Wipe the surface with a wet, soapy cloth and allow to dry fully before applying new sealant.
Krud Kutter Caulk & Sealant Remover has been specifically designed for removing silicone sealant, as the light gel formula has been formulated to cling and stay wet for longer. It works wonders on silicone, polyurethane, acrylic caulks and sealants.
Ready for your next project? Check out our handy blog on how to remove stains from walls with Krud Kutter.
FAQs
Leave Krud Kutter Caulk & Sealant Remover to soak for 5–20 minutes, or until the sealant loosens. Some applications may need longer depending on the type and amount of sealant.
Remove any loose sealant first, score the edge and apply Krud Kutter Caulk & Sealant Remover. Allow it to soak, then scrape away the loosened sealant and wipe the surface clean.
Yes. Always wear protective gloves and safety glasses when using sealant remover, and follow the instructions on the product label.