Kitchen Cupboard Paint

Spice up your kitchen with Rust-Oleum Kitchen Cupboard Paint. Our premium chalky blend is a pure treat for cupboard doors; an ultra-flat matt with an ultra-incredible depth of colour. There are 110 mouthwatering shades to choose from.


The finish is soft to touch yet hard-wearing enough to handle regular wipe-downs of splashes and splatters and stand up to cannoning corks.

With no primer or topcoat needed, this is a recipe for success.

 

•  Ultra-durable, scrubbable, water resistant, flat matt finish.
•  Choose from 110 colours.
•  Suitable for wood and melamine surfaces.

•  Not for use on counter tops or direct onto metal.
•  Can be applied over old paint and varnish.
•  Highly concentrated with exceptional coverage.

•  No priming or sanding necessary.
•  Interior use only.


5 star customer reviews


How to use Kitchen Cupboard Paint


Technical Data - Rust-Oleum Kitchen Cupboard Paint

Renovate and transform your kitchen with Rust-Oleum Kitchen Cupboard Paint. An ultra durable, scrubbable and water resistant, flat matt finish for kitchen cupboards.

Scuff and stain resistant (tested to ISO 11998 Class 1 Wet Scrub Rated) it resists knocks and stains from everyday items such as coffee, tea, ketchup, mustard and cooking oil. The product exhibits a water repellent effect that aids cleaning. Suitable for cupboards, drawers, furniture, doors & trim.

Preparation: Ensure surface is clean, dry and free from contamination. Use sugar soap equivalent to remove all traces of contamination, rinse
surface afterwards with water. If wax or oil has previously been used on the item, clean the surface thoroughly with white spirit. If painting over a hard or glossy or previously painted surface abrade the surface before application.

Application: Stir thoroughly before use. The product may be applied by brush or roller. If applying by brush, apply evenly, following the grain
of the wood. If rollering, use a short to medium nap mohair roller. Two coats are recommended.

Coverage: Up to 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface.

Drying Time: Touch dry in 1 hour. Hard dry in 4 hours. May be over coated after 4 hours. Full cure achieved after 7 days - take extra care
during use in this time.

Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Limitations: Not for use directly onto metal. Use a suitable metal primer if necessary. Not a stain blocking product. Prime any surfaces where stain bleed may be an issue, including knots. If unsure, test on an inconspicuous area before painting. Do not use abrasive cleaners to clean the product, use a damp cloth only.

*Some food items may stain the product, remove any spills immediately to stop this or minimize the effect. Not suitable for use on a bath or any surface regularly immersed in water. Temperature at time of application and during drying should be greater than 10°C.

Shelf Life: 2 years (unopened) from date of manufacture. (See base of can).

Disclaimer: The information contained herein is to the best of our knowledge true and accurate and is given in good faith but without warranty. It is our recommendation that a trial area is first coated to ensure the product is satisfactory to individual requirements. A copy of the appropriate health and safety should be consulted prior to use. This product contains a maximum of 20 g/l VOC.

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks