Chalky Finish Wall Paint

Gorgeous chalky walls the easy way. Rust-Oleum Chalky Finish Wall Paint transforms your ceilings and walls with the most stunning matt finish. This chalk-derived wall paint is highly pigmented for deep colour, without needing coat after coat after coat. Paint plaster, brick or concrete directly, simply and beautifully.

 

Sticky fingers, shoe scuffs and crayon scribbles won’t stand a chance… the finish is durable and scrubbable. With 110 tempting colours to choose from, you’re bound to find your perfect match.

 

•  Matt finish. 

•  Choose from 110 colours.

•  Water based with virtually no odour.
•  Scuff and stain resistant (tested to ISO 11998 Class 1 Wet Scrub Rated).
•  Exceptional coverage, so no need for several coats.

•  Interior use only.


5 star customer reviews


How to create a wall mural with Chalky Finish Wall Paint


Technical Data - Rust-Oleum Chalky Finish Wall Paint

A luxurious durable matt finish for interior walls and ceilings. Class 1 scrub rated for easy cleaning. Scuff and stain resistant.

Preparation: For best results, ensure surfaces are clean and free from dirt. Remove any loose, flaking material, degrease with a suitable detergent where necessary. Rinse well to remove any detergent residues and allow the surface to dry thoroughly before applying the paint. Previously painted and light porous substrates can be coated directly with Rust-Oleum Chalky Finish Wall Paint. Very porous surfaces should be appropriately sealed prior to application of Rust-Oleum Chalky Finish Wall Paint. Bare metals should be appropriately primed. Rust-Oleum Chalky Finish Wall Paint is not a stain blocking product. If necessary, prime with a suitable stain blocker or knotting sealer as appropriate. 

Application: Stir thoroughly prior to use. The product may be applied by brush or medium pile roller. 

Coverage: Up to 12m²/l per coat. Coverage may vary depending upon method and rate of application and porosity of surface.

Drying Time: Touch dry in 2 hours. Apply a second coat after 2 hours if necessary. Hard dry in 4 hours, full hardness achieved after 7 days.

Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings. 

Limitations: For interior use only. Temperature at time of the application and during drying should be greater than 5°C. To ensure paint suitability for your particular project test on a small inconspicuous area first.

Stain Removal: Remove any stains promptly, most common stains e.g. dirt, ketchup, mustard, tea, coffee can be removed using a soft cloth and warm soapy water. Do not use scourers or abrasive cleaners as these may mark the paint finish.

Shelf Life: 2 years (unopened) from date of manufacture. (See base of can).

Disclaimer: The information contained herein is to the best of our knowledge true and accurate and is given in good faith but without warranty. It is our recommendation that a trial area is first coated to ensure the product is satisfactory to individual requirements. A copy of the appropriate health and safety should be consulted prior to use.

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks